Zalman HD-160 and Accompanying Products
by Joshua Buss on March 31, 2006 12:05 AM EST- Posted in
- Cases/Cooling/PSUs
Benchmark Comparisons
To test the new HTPC case and especially the performance change when switching to the Zalman CPU and GPU coolers, we installed our standard ATX test bed with the Zalman provided ZM460-APS power supply. Measurements were made at 22.5 degrees Celcius ambient, and averaged over the course of 5 minutes after running for over 30 in the respective mode. Two instances of Folding@Home , rthdribl, and a comprehensive hard-drive loader are run simultaneously for the "load" test.
Our standard test bed has been a solid set of hardware for reviewing for several reviews now, but one of the first things that we noticed when using the ZM460-APS power supply was how much less heat it put out than the MadDog unit, which we had been using before. Before getting into detail about the other differences, here's a chart showing the performance of the case first with the Thermaltake Golden Orb and stock 6600GT cooler, then with Zalman equipment in its place. The 80mm case fans were both hooked up to 12v connections, the video card into a 5v line, the CPU fan for the Golden Orb II directly into the motherboard, and the CNPS-9500 into the included Zalman FanMate II
Final Words
Zalman's display of their quality of engineering, design, and manufacturing have all been top-notch for each and every product that we've looked at here. With a closer look at the ZM460-APS in the near future, we will surely only add to this concensus, as even with our short amount of work with the unit here, we've grown very fond of the product.
Without a doubt though, the HD-160 is a fine HTPC case. The layout is smart, simple, and elegant. The construction leaves nothing to be desired and should stand up to many years of home entertainment. Its thermal and noise performance were record-breaking, and they only became better when we used the CNPS-9500 and VF700-Cu. If only a perfect, stealthy optical drive system could've been implemented, and a VFD where the digits were more visible from actual living room distances, this could've been the perfect HTPC case that we were looking for when we started. However, the new Zalman case is closer than many by a long shot, and for one who doesn't want to settle for something that "just works", the HD-160 is a great choice, even for the relatively high asking price of around $250. For those who really want to go all out, we'd readily recommend all three products that we looked at in detail; each stands out in its own right.
To test the new HTPC case and especially the performance change when switching to the Zalman CPU and GPU coolers, we installed our standard ATX test bed with the Zalman provided ZM460-APS power supply. Measurements were made at 22.5 degrees Celcius ambient, and averaged over the course of 5 minutes after running for over 30 in the respective mode. Two instances of Folding@Home , rthdribl, and a comprehensive hard-drive loader are run simultaneously for the "load" test.
ATX Test Bed | |
DFI LanParty UT 915P-T12 Pentium 4 530 Prescott 3.0ghz OCZ 512MB DDR2 x 2 Thermaltake Golden Orb II Seagate 120gb SATA Hard Drive Chaintech GeForce 6600GT MSI DVD-CD/R/RW Combo drive Zalman ZM460-APS PSU |
![]() |
Our standard test bed has been a solid set of hardware for reviewing for several reviews now, but one of the first things that we noticed when using the ZM460-APS power supply was how much less heat it put out than the MadDog unit, which we had been using before. Before getting into detail about the other differences, here's a chart showing the performance of the case first with the Thermaltake Golden Orb and stock 6600GT cooler, then with Zalman equipment in its place. The 80mm case fans were both hooked up to 12v connections, the video card into a 5v line, the CPU fan for the Golden Orb II directly into the motherboard, and the CNPS-9500 into the included Zalman FanMate II
Final Words
Zalman's display of their quality of engineering, design, and manufacturing have all been top-notch for each and every product that we've looked at here. With a closer look at the ZM460-APS in the near future, we will surely only add to this concensus, as even with our short amount of work with the unit here, we've grown very fond of the product.
Without a doubt though, the HD-160 is a fine HTPC case. The layout is smart, simple, and elegant. The construction leaves nothing to be desired and should stand up to many years of home entertainment. Its thermal and noise performance were record-breaking, and they only became better when we used the CNPS-9500 and VF700-Cu. If only a perfect, stealthy optical drive system could've been implemented, and a VFD where the digits were more visible from actual living room distances, this could've been the perfect HTPC case that we were looking for when we started. However, the new Zalman case is closer than many by a long shot, and for one who doesn't want to settle for something that "just works", the HD-160 is a great choice, even for the relatively high asking price of around $250. For those who really want to go all out, we'd readily recommend all three products that we looked at in detail; each stands out in its own right.
48 Comments
View All Comments
krwilsonn - Saturday, April 1, 2006 - link
"edit" Ok so it says the PSU is a separate product in the first paragraph. Nevermind my inquiry about that. Also, to the author, nice work on the JPEG's... no complaints here (???)nullpointerus - Saturday, April 1, 2006 - link
It's more cost efficient to get longer cables and move the HTPC away from the listening position(s). And you might even be able to find an external DVD burner to sit on your entertainment center and run a 10 ft. USB or Firewire cable to the HTPC.Fluffiette - Friday, March 31, 2006 - link
:-*logeater - Friday, March 31, 2006 - link
Worst. Case. Ever.logeater - Friday, March 31, 2006 - link
first...DigitalFreak - Friday, March 31, 2006 - link
not...creathir - Friday, March 31, 2006 - link
This thing is TOO big for my tastes.When I think HTPC, I think small, quiet, & compact. This sucker is about the size of a normal ATX case, laid on its side.
- Creathir
BornStar18 - Friday, March 31, 2006 - link
The advantage I see to this case is that it seems to be the same size as a reciever. That would mean that it wouldn't mess with your ability to stack devices like the half depth DVD players or narrow TiVos and VCRs. I see the size as a good thing.